90 Inch Sheer Curtains (2024)

FAQs

How wide should curtains be for a 90 inch window? ›

Generally, The curtain width is always 2, 2.5, or 3 times the window's width.

Use the width of the curtain rod, and be aware that you will need to multiply this width to get the correct fullness. Otherwise? The curtains will hang flat, which isn't desirable. Use 1.5 times the width as the minimum, but two times will look more generous, while three times is recommended for sheers and linens.

Curtain panels come in standard widths and lengths. On packaging, the measurements are written as width first, then length. Standard lengths include 63 inches, 84 inches, 96 inches, 108 inches and 120 inches.

It depends on the time of day and the lighting. Sheer curtains typically do not allow to see in into a room when it is daytime because the light in the room is less intense than outside. At night, however, if there is light inside the room, you will be visible as there is more light inside than outside.

Remember, a good rule of thumb is to place them 4 to 6 inches above the top of your window frame. Next, figure out where the brackets should be. Your rod should be about 8 to 12 inches wider than your window, so make a mark about 4 to 6 inches beyond the window frame on each side.

Go High. Choosing extra long curtains and hanging them high above your window will give the illusion of more height and therefore more space within a small room.

Typically, the back layer is the light filtering, lightweight sheer, bringing natural light into the space when the front set of blackout curtains are pulled back. In other settings, this may be completely reversed to have blackouts as the base layer.

For float-length drapery, measure from your rod to about ½ inch off the floor. For break-length drapes, measure from your rod to the floor and add 1 to 2 inches. For a puddle effect, measure from your rod to the floor add 3 to 6 inches.

If you are interested in stationary panels, you will want your curtains to be long enough to lightly brush the floor, but not so long that they bunch up in a pile. A good rule of thumb is for your curtains to break anywhere from a ¼” to ½” from the floor, similar to a break in pant legs on your shoe.

Luckily, there are a number of ways to make the rooms of your home look bigger than they actually are- and using sheer curtains as a window treatment is one of them.

Can neighbours see through sheer curtains? ›

Yes for sheer day curtains, people can see through your curtains at night when lights are turned on. This is because of the lighting contrast from outside (dark) and inside (bright). You will not have this problem by layering day curtains with night curtains.

Modern day sheers have come a long way since their days as dowdy drapes. Nowadays, sheer curtains are the go-to, on-trend window treatment for interior designers and homeowners alike. Keep reading for everything you need to know about these soft window shades, plus get tips on how to style them in your home.

As a general rule, the width of your curtains should be at least twice the width of your window (if not more) to achieve a look of fullness. So, if your window is 116cms (45.5 inches) in width, you need two curtains of at least 232cms (91 inches) in width in total. You should always round up to the next full number.

To calculate curtain width, start by measuring the width of the window. Then multiply that number by 1.5 to 3 times, depending on the desired fullness and pleating style, says Kelly. "This ensures that when the curtains are drawn, they provide ample coverage and a visually appealing appearance," she says.

A good rule of thumb is 1 WOM (width of material) for up to a 48” wide window, 1-1/2 WOM for windows 47” to 96” wide and 2 WOM for windows over 8 feet. Of course, if the drapery panels are operable, the required widths of material is calculated so that the panels fully cover the window when closed.

A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more) to achieve a look of proper fullness. Example: If your window measures 36" wide (window width x 2 = 72"), you need curtains that will give a minimum width of 72".